Pre-sale & Training

Anthentication Training

 

Structured cabling business is different from other industries’ business: MORE

First of all, structured cabling is a complete system and implementation period. For example, all information ports between building and building are connected via certain path. 

Second, product life cycle and installation requirement is higher. Structured cabling product adopted by the industry required up to at least 10 to 15 years. Thus long-term requirement asks for stricter criteria and comply with international standards. Because all manufacturers in the industry provide their unique products, so the installation methods are also different.

Especially nowadays, fiber products are widely accepted by users. The installation of the optical fiber products has the certain difficulty and requires certain profession. If you want to ensure the system can run normally 10 years more after the installation is completed, the certification from manufacturers is indispensable. We are well aware of the importance of training for users and operators. Because only after a good training users can reduce the repeated operation and improve productivity. At the same time, a good system requires a well-trained team for operation and maintenance to keep overall operating costs to a minimum. For the end user, therefore, we have designed a special training courses for , different level to enable them to do their job at low cost with high efficiency and make correct use of our products .
The UCS certification training are held regularly and each training lasts for few days. It 
provides guide of UCS structured cabling system design, installation and test to partners. 

Training participants: integrators, technical engineers and sales personnel 

Training content: 


> UCS structured cabling product knowledge 


> Overview of structured cabling systems engineering 


> Integrated structured cabling system design 


> UCS structured cabling products channel design, installation and acceptance 


> UCS structured cabling system test 


> Bidding documentation 


> UCS structured cabling product installation workshop

 

 

Bidding Registration

UCS has strict project bidding registration and authorization system to avoid any MORE conflict between business partner and chaos in sales channel. If there is any project opportunity from customer, the relevant integrator should report to UCS in early time and fill the project bidding registration form. Only approved and authorized by UCS for this registration, the integrator can be unique supported and profit prevented.

 

 

Technical Support

Structured cabling is an open transmission platform containing the last 100 meters of MORE various multimedia communication network. It plays an important role in intelligent building as the central nervous system. Generally, OA, CA, BA, FA or SA, including MA can be through a set of structured cabling system to implement the signal transmission between the various devices. However, due to the impedance gap between each system equipment and each connector may be unique, all kinds of adapter will be used. So, the structured cabling system we discussed here is only limited to connect the phone and computer (including wireless AP, etc.). structured cabling system normally can be divided into six subsystems no matter what kind of building. The design of the structured cabling system can be base on these six subsystems. It may not include all six subsystems and just depends on the specific situation. Some projects may lack of one or more subsystems. 

 

The following are six subsystems: 


Work Area Subsystem


Horizontal Subsystem


Administration Subsystem


Backbone Subsystem


Equipment Room Subsystem


Campus Subsystem


Data center structured cabling system is cabling system applied in data center territory. The standard for data center is international cabling standard extending to this area and transferring the cable connection structure from building or factory into huge flat space. According to TIA-942, the Telecommunication Equipment Standard of Data Center, the space of data center is divided into several areas:


Main Distribution Area(MDA)


Horizontal Distribution Area(HDA)


Zone Distribution Area(ZDA)


Equipment Distribution Area(EDA)


The cabling system which acts as information transmission foundation is serving for these portions. 

News

Dept.

Contact Us

America
U.S.A.+
  • Add: 2485 Huntington Drive#218 San Marino, US CA91108
  • Tel: +1-626-7800469
  • Fax: +1-626-7805898
Asia
Hong Kong+
  • Address: 1702 SINO CENTER 582-592 Nathan Road, Kowloon H.K.
  • TEL: +852-2384-0332
  • FAX: +852-2771-7221
Taiwan+
  • Add: Rm 7, Floor 7, No. 95 Fu-Kwo Road, Taipei, Taiwan
  • Tel: +886-2-85124115
  • Fax: +886-2-22782010
Vietnam+
  • Add: SB9A-SB9. A-10 Vinhomes Ocean Park Urban Area, Duong Xa Commune, Gia Lam District, Hanoi City, Vietnam
  • Tel: 0862332630
Thailand+
  • Add: 127 Ban Bueng 23, Ban Bueng Subdistrict, Ban Bueng District, Thailand
  • Tel: 0985728331
Shanghai+
  • Add: Rm 7, Floor 7, No. 95 Fu-Kwo Road, Taipei, Taiwan
  • Tel: +886-2-85124115
  • Fax: +886-2-22782010
Beijing+
  • Tel: +86-21-60192558-5818
Shenzhen+
  • Tel: TEL: +86-592-5081788
Xiamen+
  • Tel: +86-592-5081788-8806
XIan+
  • Tel: +86-592-60192588-7818
Europe
BELGIUM+
  • Add: 19 Avenue Des Arts, 101, BRUSSELS,
  • Tel: +322 -4056677
  • Fax: +322-2302889